React nomadio - Idle up; Configuring Idle up

Idle Up
Idle Up changes the throttle servo position when
the trigger is centered, it has no affect at other
trigger positions. When Idle Up -> Active is On
and the trigger is centered, the throttle moves to
Idle Up -> Level percent. This is typically used to
warm up a nitro engine by running it at high idle
(just shy of the clutch engaging).
Configuring Idle Up
Use the navigation controls to configure Idle Up as follows:
1. Access the top function menu from the driving
screen.
2. Navigate to the Advanced menu.
or then
2. Navigate to the Idle Up submenu.
or then
Value Description
Active
Controls whether the Idle Up feature is
being used
4. Change the values.
or
Level
The position (-100 to +100) to which the
throttle should go when idling