Event Summary
For each Event, the “Affects” column shows which Vibration Patterns and Sounds in the RC Desktop
are tied to that event.
The units for Speed and Temperature are based on the Units setting in the Controller setup menu.
Event Level Default Affects Description
TX Battery
(0.0– 10.0 volts)
4.1 volts Vibe: TxBat Vibe Low Transmitter battery
voltage warning
Car Battery
Car (0.0 – 20.0 volts)
7.0 volts Vibe: CarBat Vibe Low car battery voltage
warning
RX Battery
RX (0.0 – 10.0 volts)
4.1 volts Vibe: RXBat Vibe Low receiver battery
voltage warning
Temperature
(0-450 degrees) 270 degrees Vibe: Temp Vibe Over-temperature
warning. One level for
each temperature sensor
port (4 total)
Speed
(0-200) 55 Vibe: Temp Vibe Speed threshold
notification
Connection
N/A Vibe: Connect Vibe,
Disconnect Vibe
Notification when
connecting to or
disconnecting from
transceiver
Alert Over
N/A Vibe: Alert Over Vibe Notification when a
sensor returns to normal
operating range after an
alert
Startup
N/A Vibe: Startup Vibe Action at power-up,
during splash screen
display
Menu
N/A
Vibe: Click Vibe, Save
Vibe, Prompt Vibe
Notification when
navigating through menu
system, clicking keys
and saving settings
Shift
N/A
Vibe: Shift Vibe
Notification when the
shift (grip) button is
pressed
Trim
N/A
Notification when user
adjusts the trim positions
To Next Page
Loading...