Units
This option affects the display units for
temperature (F/C), speed (MPH/KPH), and tach
rollout (in/cm).
Note: Changing this setting does not convert
existing temperature and speed alerts, nor tach
rollout to the new units. You must go through and
reset those settings manually after a conversion.
Selecting Unit System
Use the navigation controls to adjust the display contrast level as follows:
1. Access the top function menu from the
driving screen.
2. Navigate to the Controller Setup menu.
or then
3. Navigate to Units.
or
4. Select which units system to use.
Value Description
To Next Page
Loading...