React nomadio - High End Point

High End Point
The shift servo high end
point value adjusts the
servo’s ending position
after shifting upwards.
This is intended to be
high gear and goes with
the upshift sound event
(reverse the servo if this
is not the case on your
model). The end point
adjustments should be
adjusted prior to other
settings.
The high end point is set
independently of the low
end point (which adjusts
how far the servo moves
to the LOW turns end).
On the driving screen,
the high end point is
represented by the
length of the bar to the
right of the pointer on
the upper bar. The
greater the right length
of the bar, the greater the
high end point value.
The position of the
pointer on the bar is
affected by end point
settings (low and high)
and trim setting.
Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Ch4
Ch3 / Ch4 High End Points