ā Cutting Clamp
Release four tightening bolts on the cutting clamp, and insert the Bakelite plate. Put materials on the Bakelite plate
and tighten with bolts. Open the clamp wide at the maximum, and put the clamp dedicated to cutting on it, and
tighten it.
[Cutting exclusive clamp]
1. Turn the clamp knob on the left side of the clamp. Turn the clamp tightening handle for widen the gap of clamp.
2. Insert the cutting clamp, and tighten the clamp by turn the clamp tightening handle.
To Next Page
Loading...