Need help?Do you have a question about the REDT R&D MAGIC-70 and is the answer not in the manual?
Details safety precautions regarding electrical connections and potential hazards like shocks or fires.
Outlines safety measures for machine operation, environment, and handling to prevent accidents or damage.
Covers additional safety advice, including user supervision and environmental considerations like temperature.
Step-by-step guide for installing the MagicArt software on your computer.
Instructions for connecting and setting up the MAGIC-70 engraver with your PC.
Overview of the MagicArt program interface and how to input characters for engraving.
Details various tools in the toolbar for creating lines, curves, shapes, and applying transformations.
Explains different engraving methods like Cutting, Hatching, and Single line based on tool paths.
Steps for creating tool paths, including setting options like gap, depth, and tool selection.
Process for transferring the created tool path data to the engraver machine.
Detailed procedures for engraving the outer diameter of rings and bangles.
Steps for engraving the inner diameter of rings and bangles using the L-tool.
Steps for calibrating the tool using a touch sensor to establish the origin point.
Detailed guide for calibrating the probe to measure material height and tool length accurately.
Procedure for calibrating the laser pointer's origin for precise alignment on various clamps.
To Next Page
General