Service Program Mode Tables
D062/D063/D065/D066 4-10 SM Appendix
roller resumes its rotation after the hot roller reaches the correct temperature.
001 Thick Mode (1:ON/0:OFF) Thick Paper Normal Size
002
Thick Mode: Small Paper Size
(1:ON/0:OFF)
Thick Paper Small Size
003 Normal Mode (1:ON/0:OFF) Normal Paper Normal Size
004
Normal Mode: Small Paper Size
(1:ON/0:OFF)
Normal Paper Small Size
005 Middle Thick (1:ON/0:OFF) Middle Thick Paper Normal Size
006
Middle Thick: Small Paper Size
(1:ON/0:OFF)
Middle Thick Paper Small Size
1908 Pre-Fusing Idling
001 1:ON/0:OFF
002
This SP is for only D066.
Low Temp. Standby (Pre-Idling)
[0 to 180 /0/ 1sec]
003
This SP is for only D066.
Low Temp. Sleep Mode (Pre-Idling)
[0 to 180/60/ 1sec]
1909 LowSpeedMode
001 LowSpeedMode (Not used)
002 LowSpeedMode ProcessControl(Not used)
1910
Capacitator Status: Japan only
001 Latest Capacity
002 Current Voltage
To Next Page
Loading...
Need help?
General
