Ricoh Aficio SP 3400SF - Continuing Printing Using Mismatched Paper; Resetting the Print Job

Basic Operation in Printer Mode
103
3
Note
❒ If the [Auto Continue] setting under [Machine Settings] is enabled, the ma-
chine ignores the paper type and size settings and prints on whatever pa-
per is loaded. Printing stops temporarily when the error is detected, and
restarts automatically after ten seconds.
Reference
For details about [Auto Continue], see p.218 “Machine Settings”.
Continuing printing using mismatched paper
A While the error message is displayed, press the {Start} key.
Printing resumes on whatever paper is loaded.
Note
❒ If the paper is too small for the print job, the printed image will be cropped.
Resetting the print job
A When the error message is displayed, press the {Clear/Stop} key.
Printing is canceled.
BSP089S
BSP090S