Configuring the Machine Using Web Image Monitor
252
8
❖ Paper Selection
Note
❒ If tray 2 is not installed, only [Tray1] and [Bypass Tray] appear.
Specifying the Tray for Printing Faxes
Click the
[
Fax
]
tab on the machine settings page to specify the tray for printing faxes.
❖ Tray Selection
Note
❒ Only A4, Letter, or Legal size paper can be used for printing faxes. Make sure
to select a tray that contains paper of the valid size.
❒ If tray 2 is not installed, only [Tray1] appears.
Item Description
Paper Selection Select the paper size used for printing copies
from the following: Tray 1, Tray 2, Bypass
Tray, A4, or LTR.
When a tray is selected, the machine prints
from that tray only. When a paper size is se-
lected, the machine prints from a tray that con-
tains the paper of the specified size. If there are
multiple matching trays and the current tray
runs out of paper, the machine automatically
switches to another tray to continue printing.
If all trays run out of paper, reload paper.
Item Description
Tray Selection Select the tray for printing faxes from the fol-
lowing: Auto, Tray 1, or Tray 2.
If
[
Auto
]
is selected, the machine uses tray 1 and
tray 2 if they contain paper of the same size. In
this case, the machine starts to print from tray 1.
If tray 1 runs out of paper, the machine automat-
ically switches to tray 2 to continue printing. If
tray 2 runs out of paper, load paper in tray 1.
To Next Page
Loading...
