PDL Settings
239
7
G Press the {Clear/Stop} key to return to the initial screen.
Note
❒ You can press the {} key to exit to the previous level of the menu tree.
PDL Setting Parameters
This section describes the PDL setting parameters.
Important
❒ Some items might not appear, depending on the model type you are using.
❖ Paper Input
•Tray Priority
Specifies the tray that the machine checks first for paper that matches the print.
[Tray2] appears only when it is installed.
Default: [Tray1]
•Tray1
•Tray2
• Bypass Tray
❖ List Print
Prints lists showing configurations on the machine.
[Duplex Test Page] appears only for the Type 2 model.
• Configuration Page
Prints general information and the current configurations of the machine.
•Menu List
Prints the machine's function menus.
•Test Page
Prints a test page for checking the single-sided printing condition. The test
page contains network settings.
•Duplex Test Page
Prints a test page for checking the duplex printing condition. The test page
contains network settings.
•PCL Font List
Prints installed PCL font list.
•PS Font List
Prints installed PostScript font list.
❖ System
•Copies
Sets the machine to print the specified number of sets.
This setting is disabled if the number of pages to print is specified by the
printer driver.
Default: 1
• 1 to 999, in increments of 1
To Next Page
Loading...
