Placing Originals
85
2
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are wet with toner or white out
• Originals with adhesive materials/tapes
• Originals with writings in pencil or copied with carbon paper
• Wavy originals
Unscannable image area
Even if you correctly place originals in the ADF or on the exposure glass, mar-
gins of a few millimeters on all four sides of the original might not be scanned.
❖ Margins when using exposure glass
❖ Margins when using ADF
In copier mode In scanner mode In fax mode
Top
4 mm 0 mm 1 mm
Right
3 mm 0 mm 1 mm
Left
3 mm 0 mm 1 mm
Bottom
4 mm 0 mm 2 mm
In copier mode In scanner mode In fax mode
Top
4 mm 0 mm 0 mm
Right
3 mm 0 mm 1 mm
Left
3 mm 0 mm 1 mm
Bottom
4 mm 0 mm 2 mm
BSP055S
To Next Page
Loading...
