Reports Print
231
7
• If an external telephone was used: shows the fax number registered by the
receiving party.
• If a Quick Dial/Speed Dial was used: shows the name registered for the
destination; if a name was not programmed, shows the destination's fax
number.
• If a fax number was input using the control panel number keys: shows the
dialed fax number.
• If the fax was sent from the computer (LAN-Fax): shows the dialed fax
number.
❖ Pages
Shows the number of pages transmitted or received.
❖ Results
Shows the result of a fax transmission or reception. If an error occurred dur-
ing the fax communication, shows an error code.
Reference
For details about the error codes, see p.296 “Fax Problems”.
Reading the Memory List
❖ #
Shows file management numbers.
❖ Date/Time
Shows the date and time at which a fax was stored in memory.
❖ Type
Shows the type of function used to send the fax: "Redial" if sending was by
automatic redial; "Broadcast" if sending was by broadcast; "Memory TX" if
sending was by any other method.
❖ Remote
Shows the following information according to specified transmission meth-
od:
• If a Quick Dial/Speed Dial was used: shows the name registered for the
destination; if a name was not programmed, shows the destination's fax
number.
• If a fax number was input using the control panel number keys: shows the
dialed fax number.
• If the fax was sent from the computer (LAN-Fax): shows the dialed fax
number.
❖ Pages
Shows the number of pages a fax contained.
To Next Page
Loading...
