Getting Started
38
2
Note
❒ You can change the settings configured during the Initial Setup later under
[Admin Settings]. In addition, you can set the machine's time and date under
[Admin Settings].
❒ When the [Transmitter Header] setting under fax transmission settings is
turned on, the registered user fax number, user name, and time and date
of transmission appear on the header of every fax you send.
Reference
For details about entering characters, see p.88 “Entering Characters”.
For details about [Admin Settings], see p.233 “Administrator Settings”.
For details about [Transmitter Header], see p.210 “Fax Transmission Set-
tings”.
Changing Operation Modes
You can switch between copier, scanner, and fax modes by pressing the corre-
sponding keys.
❖ Copier mode
Press the {Copy} key to activate copier mode. While in copier mode, the
{Copy} key lights up.
❖ Scanner mode
Press the {Scanner} key to activate scanner mode. While in scanner mode, the
{Scanner} key lights up.
BSP043S
BSP044S
To Next Page
Loading...
