Ricoh Aficio SP 3400SF - 5 Using the Scanner Function; The Screen in Scanner Mode

133
5. Using the Scanner Function
This chapter describes the scanner functions.
There are two scanning methods: scanning using the control panel and scanning
from the computer (TWAIN scanning).
The Screen in Scanner Mode
This section provides information about the screen in scanner mode.
By default, the display shows the copier screen when the machine is turned on.
If the copier or fax screen is shown on the display, press the {Scanner} key on the
control panel to switch to the scanner screen.
❖ Screen in standby mode when a USB flash disk is not inserted in the machine
❖ Screen in standby mode when a USB flash disk is inserted in the machine
• First line:
Shows the current status of the machine and current color mode setting.
• Second line:
Indicates that the machine is in Scan to USB mode.
Note
❒ Scanner mode cannot be specified as the start-up mode.
BSP044S
Ready
Press Address
Ready Mono
To USB Memory