Using the Copier Function
132
4
Note
❒ Press the {} key or {Clear/Stop} key to discard the current change and re-
turn to the initial screen.
❒ You can change the machine's default [Quality] setting to always make cop-
ies with a specific document type.
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
•When the {Clear/Stop} key is pressed while the initial screen is dis-
played.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Reference
For details about [Quality], see p.202 “Copy Settings”.
For details about [Auto Clear], see p.233 “Administrator Settings”.
To Next Page
Loading...
