Guide to the Machine
14
1
Sorting the output paper
When making multiple copies of multiple pages, you can configure the machine
to sort the output pages into sets.
Important
❒ This function is only available when the original is set in the ADF, not when
it is set on the exposure glass.
❖ Preparation for sorting the output paper
A Enable the [Sort] setting under copy settings.
For details, see p.202 “Copy Settings”.
Using the Machine as a Scanner
There are two scanning methods: scanning from the computer (TWAIN scan-
ning) and scanning using the control panel.
❖ Scanning from the computer
TWAIN scanning allows you to operate the machine from your computer and
scan originals into your computer directly.
TWAIN scanning can be performed using a TWAIN-compliant application,
such as PageManager.
TWAIN scanning is available with both USB and network connections.
❖ Scanning using the control panel
Scanning using the control panel allows you to send scanned files via e-mail
(Scan to E-mail), to an FTP server (Scan to FTP), to the shared folder of a com-
puter on a network (Scan to Folder), or to a USB flash disk (Scan to USB).
The Scan to E-mail, Scan to FTP, and Scan to Folder functions are available
only through a network connection. No network connection is required for
the Scan to USB function; you can send scanned files directly to a USB flash
disk inserted into the front of the machine.
Note
❒ The machine supports WIA scanning, an additional method of scanning orig-
inals from your computer, for USB connection. WIA scanning is possible if
your computer is running Windows operating system and a WIA-compatible
application. For more information, see the manual for your application.
BSP008S
1
2
3
1
2
3
1
2
3
To Next Page
Loading...
