Using the Copier Function
128
4
E Press the {U}{T} keys to select original orientation from [Portrait] or [Land-
scape], and then press the {OK} key.
F Confirm the setting, and then press the {} key.
G Press the {Clear/Stop} key to return to the initial screen.
"Duplex" appears on the display, indicating that the machine is now in du-
plex copy mode.
Note
❒ Use the following keys to cancel settings:
• {}: Cancels the changes made to settings and returns the display to
the previous screen.
• {Clear/Stop}: Cancels the changes made to settings and returns the dis-
play to the initial screen.
❒ After this function is set, all subsequent copies will be 2-sided, unless you
cancel the setting by selecting [Off] for [Duplex Copy].
❒ Setting this function automatically disables the [ID Card Copy] setting.
Making 2-sided Copies Manually (Type 1 model)
This section describes how to make 2-sided copies manually.
A Place the odd-numbered pages of the original in the ADF.
B Press the {Copy} key.
C Press the {Start} key.
D Sort the output paper in reverse order.
E Load the output paper into the current tray.
If using tray 1 or tray 2, reload the paper with the blank side down; if using
the bypass tray, blank side up.
Make sure to load paper with the top and bottom sides oriented correctly to
avoid misprints.
F Place the even-numbered pages of the original in the ADF.
G Press the {Start} key.
To Next Page
Loading...
