Administrator Settings
233
7
Administrator Settings
This section describes administrator settings.
Changing Administrator Settings
The procedure for changing the start-up mode after power-on is provided as an
example.
A Press the {User Tools} key.
B Press the {U}{T} keys to select [Admin Settings], and then press the {OK}
key.
C If you are requested to enter a password, enter the password using the num-
ber keys, and then press the {OK} key.
D Press the {U}{T} keys to select [Default Mode], and then press the {OK} key.
E Press the {U}{T} keys to select [Copy] or [Fax], and then press the {OK} key.
The new setting is displayed with an āpā symbol, indicating that the setting
has been changed.
F Confirm the setting, and then press the {} key.
G Press the {Clear/Stop} key to return to the initial screen.
BSP051S
Menu
Admin Settings
Admin Settings
Default Mode
Default Mode
Copy *
To Next Page
Loading...
