Guide to the Machine
16
1
Sending scanned files via e-mail
You can send scanned files via e-mail using the control panel.
❖ Preparation for sending scanned files via e-mail
A Connect the machine to the network.
For details, see p.42 “Connecting with Network Cable”.
B Configure the IP address, subnet mask, and gateway address using the
control panel.
For details, see p.46 “Configuring the IP Address Settings”.
C Configure the DNS and SMTP settings using Web Image Monitor.
For details, see p.258 “Configuring the DNS Settings” and p.261  “Config-
uring the SMTP Settings”.
D Register the destinations to the Address Book using Web Image Monitor.
For details, see p.134 “Registering Scan Destinations”.
Sending scanned files to an FTP server
You can send scanned files to an FTP server using the control panel.
BSP010S
BSP011S