Configuring the Machine Using the Control Panel
240
7
•Sub Paper Size
Sets the machine to print onto paper of another size if the specified paper
is not loaded in any tray. Alternative sizes are preset to A4 and Letter.
Default: [On]
•On
•Off
• Default Paper Size
Specifies the paper size to be used when the paper size is not specified in
the print job.
Default: Letter, A4
• A4, B5 JIS, A5, B6-S, A6, Legal, Letter, Half Letter-S, Executive, 8 × 13,
8.5 × 13, Folio, 16K, Com 10, Monarch, C5 Env, C6 Env, DL Env
•Duplex
Sets the machine to print on both sides of paper according to the specified
binding method.
Default: [Off]
•Off
• Long Edge Bind
• Short Edge Bind
• Blank Page Print
Sets the machine to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets
are inserted even if you select [No Print].
Default: [Print]
•Print
•No Print
• Print Error Page
Sets the machine to print an error page when the machine detects a printer
or memory error.
Default: [Off]
•On
•Off
To Next Page
Loading...
