Using the Scanner Function
144
5
❖ Using the One Touch buttons
Press the One Touch button to which the desired Quick Dial entry is regis-
tered.
Press the {Shift} key to toggle the One Touch buttons between Quick Dial en-
tries Nos.1 to 10 and Nos. 11 to 20.
❖ Using the {Pause/Redial} key
Press the {Pause/Redial} key to select the last used destination.
Note
❒ When you specify a scan destination, the machine's scan settings change au-
tomatically according to the information registered for that destination in the
Address Book. If necessary, you can change the scan settings using the control
panel.
❒ The {Pause/Redial} key is not effective for the first scan job after the machine
is turned on.
❒ To select destinations not registered as Quick Dial entries, use the {Address
Book} key.
Reference
For details about how to specify destinations using the { Address Book} key,
see p.141 “Basic Operation for Scan to E-mail/FTP/Folder”.
BSP109S
BSP110S
To Next Page
Loading...
