Configuring the Machine Using the Control Panel
216
7
•TX Speed
Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
• RX Speed
Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
❖ Report Settings
•TX Report
Sets the machine to print a transmission report automatically after a fax
transmission.
When the machine is in Immediate Transmission mode, the image of the
original will not be reproduced on the report, even if [Error Only Img] or [Al-
ways Prt Img] is selected.
Default: [Always Prt Img]
• Error Only
Prints a report when a transmission error occurs.
• Error Only Img
Prints a report with an image of the original when transmission error
occurs.
• Always Printed
Prints a report for every fax transmission.
•Always Prt Img
Prints a report with an image of the original for every fax transmission.
•Not Printed
• Activity Report
Sets the machine to print an activity report automatically for every 100 fax
jobs (both sent and received).
Default: [Auto Print]
•Auto Print
•Not Printed
To Next Page
Loading...
