Getting Started
28
2
 CAUTION:
❖ Space Required for Installation
The recommended (minimum) space requirements are as follows:
• Keep the machine away from humidity and dust. Otherwise a fire or an 
electric shock might occur. Do not place the machine on an unstable or tilt-
ed surface. If it topples over, an injury might occur.
• Keep the machine in an area that is within optimum environmental condi-
tions. Operating the machine in an environment that is outside the recom-
mended ranges of humidity and temperature can cause an electrical fire 
hazard. Keep the area around the socket free of dust. Accumulated dust 
can become an electrical fire hazard.
• Make sure the room where you are using the machine is well ventilated and 
spacious. Good ventilation is especially important when the machine is 
used heavily.
• Machine sound levels exceeding  > 65.8dB (A) are not suitable for desk 
work environments, so place the machine in another room.
• When new, electrical devices containing volatile materials will normally re-
lease emissions into the air of their vicinity. For this reason, for the first few 
days after installation of a new device, strong ventilation inside the room 
where it is placed is necessary.
BSP022S