Getting Started
36
2
A Plug in the power cord.
B Turn the power switch to ”aOn”.
The {Copy} key on the control panel lights up.
Note
❒ Depending on the [Default Mode] setting under [Admin Settings], the {Facsim-
ile} key may light up instead of the {Copy} key.
❒ The machine may make a noise while initializing. This noise does not indi-
cate a malfunction.
❒ To turn off the power, turn the power switch to “b Off”.
Reference
For details about [Default Mode], see p.233 “Administrator Settings”.
BSP040S
BSP041S
BSP042S
To Next Page
Loading...
