Installing the Optional Paper Feed Unit
55
2
D Lift the machine using the inset grips on both sides.
E There are three upright pins on the optional paper feed unit. Align them
with the holes on the underside of the machine, and then carefully lower
the machine onto them.
F After installing the option, print the configuration page to confirm the in-
stallation.
If it is installed properly, “Tray 2” will appear under “Tray Info” on the con-
figuration page.
Note
❒ After installing the optional paper feed unit, select tray 2 in the printer
driver. For details, see the printer driver Help.
❒ If the optional paper feed unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For details about printing configuration page, see p.228 “Printing the Con-
figuration Page”.
For details about loading paper in tray 2, see
p.74 “Loading Paper in Tray 2”
.
BSP025S
BSP035S
To Next Page
Loading...
