Getting Started
78
2
If you load A4 (297 mm) or larger size paper, pull out the bypass tray extension.
B Slide the side guides outward, then load paper with the print side up, and
push in until it stops against the machine.
C Adjust the side guides to the paper width.
Note
❒ After loading paper in the tray, specify the paper type and size using the
control panel or the printer driver.
Reference
For details about supported types of paper, see p.56 “Paper and Other Me-
dia”.
For details about specifying the paper type and size, see p.81 “Specifying
Paper Type and Paper Size”.
BSP083S
BSP084S
BSP073S
To Next Page
Loading...
