Duplex
Select whether or not to print on both sides of a sheet. If you specify duplex printing, you must
also specify the binding method.
Default: [Off]
• Off
• Long Edge Bind
• Short Edge Bind
Rotate by 180 Degrees
Select whether or not to rotate the print image by 180 degrees.
Default: [Off]
• On
• Off
Blank Page Print
Select whether or not to print blank pages.
Default: [On]
• On
• Off
Letterhead Setting
Select whether or not to print on paper that has a fixed print side or print direction (letterhead
paper, for example).
Default: [Auto Detect]
• Off
Not printing with the letterhead printing mode.
• Auto Detect
Select whether or not to print using letterhead mode whenever a page that has a fixed print
side or print direction is specified as the first page.
• On (Always)
Print with the letterhead printing mode regularly.
Tray Setting Priority
Specify whether the paper size and type settings that are applied are those specified using the
control panel, printer driver, or print command.
• Bypass Tray
Specify whether the paper size and type settings applied for bypass Tray are those specified
using the control panel, printer driver, or print command.
5. Making Printer Settings Using the Control Panel
128
To Next Page
Loading...
Need help?
General
