• p.109 "Maintenance Menu"
• p.149 "Checking the Error Log"
Sending a Hold Print file
The following procedure describes how to print a Hold Print file with the PCL 6/PCL 5c or PostScript 3
printer driver.
• Applications with their own drivers, such as PageMaker, do not support this function.
1. Configure Hold Print in the printer driver's properties.
For details about configuring the printer drivers, see the relevant Help files.
2. Click [Details...], and then enter a user ID in the [User ID:] box.
You can also set a file name. The file name you set will be displayed on the printer's Job List screen.
3. Start printing from the application's Print dialog box.
The Hold Print job is sent to the printer and stored.
Printing a Hold Print file using the control panel
1. On the printer's control panel, press [Prt.Jobs].
2. Select [Hold Print Jobs] using the [ ] or [ ] key, and then press [Job List].
A list of Hold Print files stored in the printer appears.
Depending on the security settings, certain print jobs may not be displayed.
You can print files also by pressing [User ID].
3. Printing Stored Documents
74
To Next Page
Loading...
Need help?
General
