Ricoh C211 - Page 243

INDEX
No.
NAME FUNCTION
41
Master Cutter Switch
Informs the CPU to cut the master paper leading
edge.
42
Scanner Safety Switch
Checks whether the scanner unit is closed correctly
or not.
44
Drum Rotation Switch Informs the CPU to rotate the main motor at 10 rpm.
45
Front Door Safety Switch
Checks whether the Front Door is set correctly or
not.
46
Drum Safety Switch Checks whether the drum unit is set correctly or not.
52
Paper Table Safety Switch
Checks whether the paper table is opened correctly
or not.
57
Interlock Switch Releases the cover safety functions.
59
Main Switch Turns the power on or off.
62
Full Master Detecting Switch
Informs the CPU when the master eject box is full of
masters.
63
Pressure Plate Position
Switch
Informs the CPU when the pressure plate has
reached the home position.
64
Printing Density Switch
Use to select the printing density according to the
type and quality of the original.
65
ADF Safety Switch Check whether the ADF unit is set correctly or not.
Sensors
1
Original Registration Sensor
Informs the CPU when the original leading edge
reaches the exposure glass.
2
2nd Original Sensor Detects when the original is set.
9
Master End Sensor
Informs the CPU when the plotter unit runs out of
master roll.
13
Master Buckle Sensor Detects master buckles.
17
Master Eject Sensor
Detects when the used master is sent into the
master eject box.
19
1st Original Sensor Detects when the original is set in the ADF mode.
29
Drum Rotation Sensor Supplies timing pulses to the main board.
33
2nd Drum Position Sensor Checks the position of the drum.
34
1st Paper Exit Sensor Detects misfeed.
35
2nd Paper Exit Sensor Detects misfeed.
37
1st Drum Position Sensor Checks the position of the drum.
49
Paper Table Height Sensor
Detects when the paper table reaches the paper
feed position.
51
Paper End Sensor
Informs the CPU when the paper table runs out of
paper.
53
Paper Table Lower Limit
Sensor
Detects when the paper table reaches the lowest
position.
54
Printing Pressure Sensor
Informs the CPU when the printing pressure is
applied.
Overall
Information
C216 1-7 SM