2. lNDICATORS/KEYS/PROGRAMS:
VT23001VT2500
2.1
2.2
2.3
CHECK PAPER SIZE/DIRECTION INDICATOR
When an enlargement ratio (A4: 115%, 122%, or 141% LT: 115?40,127%,
or 141 !!XO) k selected with the Reduce/Enlarge key, the Check Paper
Size/Direction indicator lights, This indicator turns off when the Master
Making key, Print Start key, or Proof key is pressed and full size
reduction mode is selected.
All keys remain accessible after the Check Paper
lights. This indicator simply reminds the customer
direction of the paper set on the paper table.
Size/Direction
to check the
mode or
indicator
size and
REDUCE/ENLARGE KEY
The Reduce/Enlarge key can be used when the machine stops. The
reproduction ratio changes as shown below,
A4 version :
LT version :
SKIP PAPER
71 Yo~82Yo+93Yo+l 15Yo+122Yo~141 ~0
64 Yo+75?40+93’?40+I 15Yo+I 22?40+141 %
FEED SWITCH
The paper feed interval can be set to allow time for the user to remove
prints. This interval can be adjusted with the Skip Paper Feed switch.
The three following steps are available:
. Standard (normal feeding)
s 1/3 rotation (one sheet fed every three drum rotations)
. 1/5 rotation (one sheet fed every five drum rotations)
This function can also be used in Proof Mode,
If the Stop key is pressed before the copier feeds out a print during the 1/3
or 1/5 step interval, the copier returns to the normal feed interval and a
mint is fed out soon after the Start kev is Dressed.
2-23
To Next Page
