BULLETIN NO.
830/950-001
DATE
7-21-89
SS830
PRIPCMT
SUBJECT: BLANK IMAGE
/
SYMPTOM:
Blank image prints may be produced and/or master paper is not burned properly by the thermal head.
CAUSE:
The
thermal head drive line becomes grounded due to improper screw length for securing the
thennal
head when
reinstalling.
SOLUTION:
Ensure proper assembly of thermal head when reinstalling.
NOTE: Original size screws must
return
to original
SCCBW
holes.
Themal
Head
The
acmw
contack
ttm3
pdnt
pattern
UNITS AFFECTED:
All
SS830
priports exhibiting the above symptom.
short
screw
M3x5
a
1
El
I
I
+
/
1
Clearance between
the
8cmw
and the
print
pattern
RICOH
CORPORATION
/
COPIER PRODUCTS GROUP l 155
Passaic
Avenue. Fairfield. NJ 07006 l
20l/882-~00
l
FLX
-
20118828~41
To Next Page
