System SP Tables-5
D017/D018/D019/D020/D084/D085 4-86 SM Appendix
9 Non Genuine Toner Alarm
10 Supply Automatic Ordering Call
11 Supply Management Report Call
12 Jam/Door Open Call
5792
MCS Debug Log DFU
5793
ECS Debug SW DFU
5801
Memory Clear
Resets NVRAM data to the default settings. Before executing any of these
SP codes, print an SMC Report.
1 All Clear Initializes items 2 to 15 below.
2 Engine
Initializes all registration settings for the
engine and copy process settings.
3 SCS
Initializes default system settings, SCS
(System Control Service) settings,
operation display coordinates, and ROM
update information.
4 IMH Memory Clear
Initializes the image file system.
(IMH: Image Memory Handler)
5 MCS
Initializes the automatic delete time setting
for stored documents.
(MCS: Memory Control Service)
6 Copier application Initializes all copier application settings.
7 Fax application
Initializes the fax reset time, job login ID, all
TX/RX settings, local storage file numbers,
and off-hook timer.
To Next Page
Loading...
