System SP Tables-5
SM Appendix 4-85 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
5508
CC Call Japan Only
1 Jam Remains
Enables/disables initiating a call.
[0 to 1/1]
0: Disable
1: Enable
2 Continuous Jams
3
Continuous Door
Open
11
Jam Detection: Time
Length
Sets the length of time to determine the length of an
unattended paper jam.
[03 to 30/1]
12
Jam Detection
Continuous Count
Sets the number of continuous paper jams required to
initiate a call.
[02 to 10/1]
13
Door Open: Time
Length
Sets the length of time the remains opens to
determine when to initiate a call.
[03 to 30/1]
5515
SC/Alarm Setting
With NRS (New Remote Service) in use, these SP codes can be set to issue
an SC call when an SC error occurs. If this SP is switched off, the SC call is
not issued when an SC error occurs.
1 SC Call
[0 or 1 / 1 / - ]
0: Off
1: On
2 Service Parts Near End Call
3 Service Parts End Call
4 User Call
6 Communication Test Call
[0 or 1 / 1 / - ]
0: Off
1: On
7 Machine Information Notice
8 Alarm Notice
To Next Page
Loading...
