Ricoh D017 - Page 517

System SP Tables-5
D017/D018/D019/D020/D084/D085 4-84 SM Appendix
5507 Supply Alarm
1
Paper Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the paper
supply. DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified
number transfer sheets for each paper size (A3,
A4, B4, B5, DLT, LG, LT, HLT)
2
Staple Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the stapler
installed in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
3
Toner Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the toner end.
DFU
0: Off, 1: On
If you select "1" the alarm will sound when the
copier detects toner end.
128* interval: Others
The "Paper Supply Call Level: nn" SPs specify
the paper control call interval for the referenced
paper sizes. DFU
[00250 to 10000 / 1000 / 1 Step]
132* Interval: A3
133* Interval: A4
134* Interval: A5
141* Interval: B4
142* Interval: B5
160* Interval: DLT
164* Interval: LG
166* Interval: LT
172* Interval: HLT