System SP Tables-5
SM Appendix 4-93 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
51 Relay Fan Motor Bridge cooling fan motor (Optional bridge unit)
52 Relay Transport Motor Bridge unit drive motor (Optional bridge unit)
53 Relay SOL Junction gate solenoid (Optional bridge unit)
54 Total Counter Total counter
60 Polygon Motor Polygonal mirror motor
61 Polygon Motor Polygonal mirror motor and laser diode
62 LD ON
Laser diode - Do not use
107 QL
108 PP. Chrg.
PP. means "Power Pack" (PCBs).
109 PP. Development
110 PP. Image Transfer
111 PP. Separation Voltage
202 Scanner Lamp
5810
SC Reset
Resets all level A service call conditions, such as fusing errors. To clear the
service call, touch "Execute" on the LCD, then turn the main power switch
off/on.
5811
Machine No. Setting DFU
This SP presents the screen used to enter the 11-digit number of the
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
To Next Page
Loading...
