System SP Tables-5
D017/D018/D019/D020/D084/D085 4-94 SM Appendix
5812 Service Tel. No. Setting
1 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
2 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
3 Supply Displayed on the initial SP screen.
4 Operation
Allows the service center contact telephone number to be
displayed on the initial screen.
5816 Remote Service
001
I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
0: Remote service off
1: CSS remote service on
2: @Remote service on
002
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to "2".
003
Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote registor has been
completed.
To Next Page
Loading...
