Copier Installation
D017/D018/D019/D020/D084/D085 2-9 SM
Installation
Developer
1. Spread the vinyl sheet provided with the developer kit on a flat surface.
2. Open the right door [A].
3. Open the front door [B].
4. Push the latch [C] and remove the PCU [D].
5. Remove the front screw [A] ( x1)
6. Remove the rear screws [B] ( x2)
7. Release the rear tab [C] then front tab [D], then separate the top and bottom.
Be sure to release the rear tab first and the front tab second.
To Next Page
Loading...
