System SP Tables-5
SM Appendix 4-131 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
5849
Installation Date
Displays or prints the installation date of the machine.
1 Display
The "Counter Clear Day" has been changed to
"Installation Date" or "Inst. Date".
2 Switch to Print
Determines whether the installation date is printed on the
printout for the total counter.
[0 to 1/1]
0: No Print
1: Print
3 Total Counter
5850*
Address Book Function Japan Only
The machine is shipped ready to use with a G3 line. Use this SP to switch all
at once to G4 after adding a G4 line. If the G4 line becomes unusable for
some reason, you can use this SP to switch easily back to G3. Just touch
[Replacement].
5851
Bluetooth Mode
Sets the operation mode for the Bluetooth Unit. Press either key.
[0: Public] [1: Private]
5853
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM
onto the hard disk. Then these stamps can be used by the system. If this is
not done, the user will not have access to the fixed stamps ("Confidential",
"Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting
the HDD. Always switch the machine off and on after executing this SP.
To Next Page
Loading...
