Bit Switches - 2
D361/D510 100 SM
I-fax Switch 02 (SP No. 1-102-003)
No Function Comments
5-6 Not Used
7
Image Resolution of RX Text Mail
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
The "1" setting requires installation of the Function Upgrade Card in order to have
enough SAF (Store and Forward) memory to receive images at 400 x 400
resolution.
I-fax Switch 03 (SP No. 1-102-004)
No Function Comments
0
Original Output at Transfer Station
This setting determines whether the original is output at the transfer station when
it is received from the sender that initiated the transfer transmission. This feature
is the same as for G3 transfer transmissions.
0: Received original not output at the transfer station.
1: Received original output. The original is printed after the transfer station has
transferred it to the destinations, so its output confirms that the original has been
transferred.
1
Transfer Result Report
This setting determines when a Transfer Result Report is generated and returned
to the transfer requestor.
0: Returns the report after each transfer.
1: Returns the report only if an error occurred during transfer.
To Next Page
Loading...
