Bit Switches - 2
SM 101 D361/D510
D361/D510
Fax Option
Type
3350/3351
I-fax Switch 03 (SP No. 1-102-004)
No Function Comments
2
Destination Error Handling for Reception Transfer Request
This setting restricts transfer transmission based on whether the final destinations
are correct or not.
0: The transfer station transmits to correct destinations only (addresses with no
errors in them).
1: If any address has an error in it, the transfer station transfers no transmissions
and returns a transfer transmission failure report to the requestor that initiated the
transfer.
There is no negotiation between the transfer initiator and the transfer station to
determine whether the final destination addresses are correct or not. This setting
determines whether or not the transfer station transfers the transmissions if there
is a mistake in even one of the final destination addresses.
3
Polling ID Check for Reception of Transfer Request
This setting determines whether the polling IDs of incoming transmissions are
checked to ensure that the polling IDs match.
0: Receives and transfers only messages that have matching polling IDs.
1: Receives and transfers all messages, even if the polling IDs do not match.
4-7 Not Used
To Next Page
Loading...
