EasyManua.ls Logo

Ricoh G104 - Page 133

Ricoh G104
601 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE MODE TABLE
SM 5-17 G104
Service
Tables
1105 069 SP1: Simp.: [FC] LS *EGB
[120 to 180 / 165 / 1°C/step]
1105 071 SP1: Dupl.: [FC] LS *EGB
[120 to 180 / 165 / 1°C/step]
1105 089 OHP: [K]: LS *EGB
[120 to 180 / 160 / 1°C/step]
1105 090 OHP: [FC]: LS *EGB
[120 to 180 / 160 / 1°C/step]
1106
[Fusing Temp.] Fusing Temperature
H. Roller: Heat Roller
1106 002 H. Roller Temp.
Displays the heating roller temperature at
this time.
[0 to 230 / 0 / 1°C/step]
1911
[Print Speed Ctl] Print Speed Control for small paper sizes (A5 or smaller)
(Sheets of paper, Interval time or Temperature, Process Speed)
Simple [one-sided] or Duplex
Process Speed -> LS: Low speed, RS: Regular speed
See section 6 for more about these SPs.
1911 001 PPM Down: RS: S *EGB
1911 002 PPM Down: LS: S *EGB
The print speed (PPM) is reduced after the
machine has printed this number of pages
continuously.
[0 to 99 / 15 / 1 sheet/step]
1911 003 PPM Down Inter. *EGB
The print speed goes back to the normal
speed after this interval.
[0 to 255 / 30 / 1 sec/step]
1911 004 S-size Temp. 1 *EGB
The temperature is decreased by this
amount to prevent overheating the fusing
unit for small size paper.
[0 to 200 / 2 / 1°C/step]
1911 006 S-size Temp. 2 *EGB
1911 008 S-size Temp. 3 *EGB
[0 to 200 / 5 / 1°C/step]
1911 014 S-size Temp.: S1 *EGB
These SPs control when the above
temperature reductions are done.
[0 to 255 / 30 / 1 sheet/step]
1911 016 S-size Temp.: S2 *EGB [0 to 255 / 20 / 1 sheet/step]
1911 018 S-size Temp.: S3 *EGB [0 to 255 / 50 / 1 sheet/step]
1911 021 Simple Temp. 1 *EGB
Adjusts the temperature reduction for one-
sided printing.
[0 to 200 / 2 / 1°C/step]
1911 022 Simple Temp. 2 *EGB
[0 to 200 / 5 / 1°C/step]
1911 023 Simple Temp.:S1 *EGB
These SPs control when the above
temperature reductions are done.
[0 to 500 / 100 / 1 sheet/step]
1911 024 Simple Temp.:S2 *EGB [0 to 500 / 30 / 1 sheet/step]
1911 025 Duplex Temp. 1 *EGB
Adjusts the temperature reduction for duplex
printing.
[0 to 200 / 2 / 1°C/step]
1911 026 Duplex Temp. 2 *EGB
[0 to 200 / 5 / 1°C/step]
1911 027 Duplex Temp.: S1 *EGB
These SPs control when the above
temperature reductions are done.
[0 to 500 / 80 / 1 sheet/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA

Table of Contents

Related product manuals