Ricoh G179 - Page 203

SC Tables: SC8xx -2
SM 4-37 G179
Trouble-
shooting
Delete All error 1: HDD
A data error is detected for the HDD/NVRAM after the Delete All option has
been used.
Note: The source of this error is the DataOverwriteSecurity Unit (M345)
running from an SD card.
874
CTL
D
1. Turn the main switch off/on and try the operation again.
2. Install the DataOverwriteSecurity Unit again. For more, see
“Installation”.
3. HDD defective
Delete All error 2: Data area
An error occurs while the machine deletes data from the HDD.
Note: The source of this error is the DataOverwriteSecurity Unit (M345)
running from an SD card.
875
CTL
D
Turn the main switch off/on and try the operation again
Log Data Error
876
CTL
D
An error is detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off
while it is operating.
Log Data Error 1
 Damaged log data file in the HDD
-001
Initialize the HDD with SP5832-001.
Log Data Error 2
 HDD encryption unit not installed
-002
1. Ask the customer’s administrator to disable the HDD encryption
setting with a user tool.
2. Install the HDD encryption unit.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA