Ricoh G179 - Page 204

SC Tables: SC8xx -2
G179 4-38 SM
Log Data Error
876
CTL
D
An error is detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off
while it is operating.
Log Data Error 3
 Invalid log encryption key due to defective NVRAM data
-003
1. Initialize the HDD with SP5832-001.
2. Ask the customer’s administrator to disable the HDD encryption
setting with a user tool.
Log Data Error 4
 Unusual HDD encryption function due to defective NVRAM data
-004
Initialize the HDD with SP5832-001.
Log Data Error 5
 Installed a NVRAM or HDD which was used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-001.
Log Data Error 99
 Other than the above causes
-099
Ask your supervisor.
HDD DataOverwriteSecurity SD card error
The 'all delete' function cannot be executed but the DataOverwriteSecurity
Unit (M345) is installed and activated.
 Defective SD card (M345)
 SD card (M345) not installed
877
CTL
B
1. Replace the NVRAM and then install the new SD card (M345).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA