SP2-xxx: Drum-1
SM 5-31 G179
Service
Tables
Adjusts the transfer current for printing at leading edge the first side of the
paper.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
Leading Edge: 2nd Side
[10 to 100 / 20 / 1μA ]
004
Adjusts the transfer current for printing at leading edge the second side of
the paper.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
By-pass: Image Area
[10 to 100 / 45 / 1μA ]
005
Adjusts the transfer current for printing from the by-pass tray.
If the user normally feeds thicker paper from the bypass tray, use a higher
setting.
By-pass: Leading Edge
[10 to 100 / 20 / 1μA ]
006
Adjusts the transfer current for printing at the leading edge of paper fed from
the by-pass tray.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
To Next Page
Loading...
