SP5-xxx: Mode-1
SM 5-43 G179
Service
Tables
Paper Size Type Select
5131*
Selects the paper size (type) for both originals and print paper.
[0 to 2 / - / 1 step]
0: Japan, 1: North America, 2: Europe
After changing the setting, turn the machine off and on. If the paper size of
the archive files stored on the HDD is different, abnormal printouts could
result.
Bypass Length Setting
5150
Sets up the by-pass tray for long paper.
[0 to 1 / 0 / 1]
0: Off [Default]
1: On. Sets the tray for feeding paper up to 600 mm long.
With this SP selected on, paper jams are not detected in the paper path.
5165* Z - fold Position
001 to 008
Not used
CE Login
5169*
If you will change the printer bit switches, you must ‘log in’ to service mode
with this SP before you go into the printer SP mode.
[0 to 1 / 0 / 1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
By-pass Tray Paper Size Error
[0 to 1 / 0 / 1 ] 0= OFF, 1= ON
5179*
This SP determines whether a paper size error prompt appears when the
machine detects the wrong paper size for the job and during feed from the
by-pass tray.
To Next Page
Loading...
