SP5-xxx: Mode-1
SM 5-49 G179
Service
Tables
Sets the number of users for the access exclusion and password attack
detection function.
Password Max Num
[50 to 200 / 200 / 1 ]
002
Sets the number of passwords for the access exclusion and password
attack detection function.
Monitor interval
[1 to 10 / 3 / 1 sec]
003
Sets the interval of watching out for user information and passwords.
5417 Access Attack
Permissible number
[0 to 500 / 100 / 1]
001
Sets a limit on access attempts to prevent password cracking.
Attack Detect Time
[10 to 30 / 10 / 1 sec]
002
Sets a detection time to count password cracking.
Cert Wait
[0 to 9 / 3 / 1 sec]
003
Sets the wait time to slow down the speed of certification when an excessive
number of access attempts have been detected.
Attack Max Num
[50 to 200 / 200 / 1]
004
Sets a limit on the number of requests received for certification in order to
slow down the certification speed when an excessive number of access
attempts have been detected.
User Authentication
5420
These settings should be done with the System Administrator.
These functions are enabled only after the user access feature has
been enabled.
041 Printer
[0 or 1/ 0 / 1] 0: ON. 1: OFF
To Next Page
Loading...
