SP5-xxx: Mode-1
G179 5-50 SM
Determines whether certification is required
before a user can use the printer application.
051 SDK1
061 SDK2
071 SDK3
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
Auth Error Code
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
[0 or 1 / 0 / -]
0: OFF [Default], 1: ON
Determines whether an error code appears in the
system log after a user authentication failure occurs.
5501* PM Alarm Interval
Print Out
001
Sets the PM alarm interval.
[0 to 9999 / 0 / 1 k printouts/step]
0: No PM alarm
Jam Alarm
5504*
Sets the alarm to sound for the specified jam level (document misfeeds are
not included).
[0 to 3 / 3 / 1 step]
0: Zero (Off)
1: Low (2.5K jams)
2: Medium (3K jams)
3: High (6K jams)
5505* Error Alarm
To Next Page
Loading...
