SP5-xxx: Mode-2
G179 5-56 SM
SC Reset
5810
Fusing SC Reset
Resets all level A service call conditions, such as
fusing errors. To clear the service call, touch
“Execute” on the LCD, then turn the main power
switch off/on.
Machine No. Setting (DFU)
Code Set
5811*
This SP presents the screen used to enter the 11-digit number of the
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
5812* Service TEL
001 Telephone
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
002 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode).
To Next Page
Loading...
