Ricoh G179 - Page 278

SP5-xxx: Mode-3
G179 5-62 SM
This SP setting determines if the operator can confirm the previous version
of the firmware before the firmware update execution. If the option to confirm
the previous version is selected, a notification is sent to the system manager
and the firmware update is done with the firmware files from the URL.
Firmware Size
086
Allows the service technician to confirm the size of the firmware data files
during the firmware update execution.
CERT: Macro Vsn
087
Displays the macro version of the @Remote certification
CERT: PAC Vsn
088
Displays the PAC version of the @Remote certification.
CERT: ID2 Code
089
Displays ID2 for the @Remote certification. Spaces are displayed as
underscores (_). Asterisks (****) indicate that no NRS certification exists.
CERT: Subject
090
Displays the common name of the @Remote certification subject. CN = the
following 17 bytes. Spaces are displayed as underscores (_). Asterisks (****)
indicate that no DESS exists.
CERT: SeriNum
091
Displays serial number for the @Remote certification. Asterisks (****)
indicate that no DESS exists.
CERT: Issuer
092
Displays the common name of the issuer of the @Remote certification. CN =
the following 30 bytes. Asterisks (****) indicate that no DESS exists.
CERT: St ExpTime
093
Displays the start time of the period for which the current @Remote
certification is enabled.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA