Ricoh IJM C180F

120 Chapter 4 Fax EN
To enable fax confirmation from the Embedded Web Server (EWS)
1. Open the Embedded Web Server (EWS). For more information, see Open the Embedded Web Server.
2. Click the Fax tab.
3. Enter the PIN from the label on your printer, and click Submit.
NOTE: The PIN label can be found inside the front door.
4. In the Settings section, click Advanced Fax Settings.
5. Select one of the following options from the Fax Confirmation drop-down list.
On Fax Send Prints a fax confirmation report for every fax you send.
Send and Receive Prints a fax confirmation report for every fax you send and receive.
Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the
default setting.
On Fax Receive Prints a fax confirmation report for every fax you receive.
6. Click Apply.
7. Click OK.
To include an image of the fax on the report from the printer control panel
1. From the printer control panel display, touch Fax.
2. Touch Setup.
3. Touch Reports and touch Fax Confirmation.
4. Touch On (Fax Send) or On (Fax Send and Fax Receive).
5. Touch Fax confirmation with image.
To include an image of the fax on the report from the Embedded Web Server (EWS)
1. Open the Embedded Web Server (EWS). For more information, see Open the Embedded Web Server.
2. Click the Fax tab.
3. Enter the PIN from the label on your printer, and click Submit.
NOTE: The PIN label can be found inside the front door.
4. In the Settings section, click Advanced Fax Settings.
5. Select On from the Image on Fax Send drop-down list.